Nord GSM Mini

Wired control panel with built-in keypad for low-budget security systems. Suitable for small offices and commercial premises.

Buy demo-kit

Nord GSM Mini

Wired control panel with built-in keypad for low-budget security systems. Suitable for small offices and commercial premises.

Panel capacity

4 (16) wired security zones or discrete outputs.

Expansion up to 16 zones or discrete outputs with an external expander EW-12.

All included

Built-in keypad. Silicone buttons with backlit and a sound confirmation of pressing.

Remote 110 /220 V power supply unit.

Battery 2.2 А*h, 3.7 V

Record-low cost of finished solution

No need to buy power supply unit, battery and control devices – all included.

Wire security system

Nord GSM Mini
PIR
Magnetic contact
MyAlarm App

Quick installation of security system

Nord Mini is ready to work right out of the box. Unlike control panels of this class, the Mini does not need to be dismantled, twisted wires and the like. An engineer assembles the device with his hands and without a screwdriver: it's fast and convenient.

Slots for 2 sim-cards and terminals
Tracing paper for fixing holes.
Backup power supply 2.2 A*h, 3.7 V
Convenient Hubble configurator

Easy configuration

The engineer connects the laptop to the Nord via USB
and configures device communication with console, partitions, users, sensors and other parameters of the alarm system. Engineer configures Nord with a special soft, we call it Hubble.

Hubble configurator

The feature of Hubble's work is that the engineer first creates a configuration device, and only then records to the device. Therefore, the configurator works quickly, reacting at lightning speed to engineer actions.

For typical sites, you can save configuration and record it on the device without wasting time on individual setting.

Interface for checking sensors and other devices

The configurator has an interface of devices' settings, it is called the status panel. Engineer sees number of zone, state and error signal level for each device.

The convenient web app for testing connection channels

Engineer tests both sim-cards: GPRS, CSD, voice channel and SMS.

App lets activate or desactivates any channel for testing.

Distant service

An engineer remotely connects to the Nord panel through the web interface of C.Nord Cloud and configures it with a Hubble configurator. The engineer configures the panel the same way as if he connects via USB.

Speed and safety

The panel configuration is stored on the device and in the cloud. Therefore, even if you have a bad connection with the device, Hubble will load up immediately (from the cloud) and the engineer starts to work at once.

The same is with the saving of settings. If connection is bad, the engineer does not have to wait: the new configuration immediately will be written into the cloud, and the cloud controls that this configuration will go to the device.

Safety

An engineer cannot connect to the control panel without permission. When it is necessary maintenance, an operator of the Security Center gives the engineer permission for remote access to a site for restricted time.

Rollout firmware update

We constantly refine our solutions: we produce new sensors, update the interface of the configurator, etc. For compatibility sometimes it is necessary to update the firmware of the control panel and other devices.

In the case of Nord panel, an engineer will not have to visit the site — he can updated the firmware remotely. Moreover, the engineer can update the firmware immediately on all or several devices and monitor the progress of the update.

Two ways to protect a site from hijacking by a competitor

1) You can switch off the reset configuration ofcontrol panel tothe factory settings, and for access to configurator set acomplex password.

If an engineer from a competing firm connected tothe device via USB, he can't enter theconfigurator without thepassword.

2) You can connect the panel toyour console. The address for connecting to the console isrecorded in the internal memory oftheprocessor and remains there even when theconfiguration isreset.

Help section about Nord Mini

Contact us

Protection against inference panel fail

Even if the attackers break up panel, it will have time to send the event «Probable alarm» to the security console.

Installers put the control panel with a keypad at the entrance on the site, so that customers can conveniently enter the disarming code while there is a delay in the entrance.

We added the event "Probable alarm" (E138) to prevent inference panel fail during the "entry delay". It means, that if after a probable alarm from the site he disarming event will not come, then the console will form an alarm event.

Security Center

Nords are working with one of the best professional consoles in Russia — Security Center.

Security Center, Duty operator window.

MyAlarm App

Personal account for client of private security company and app to control security system.

Custom event timeline

You, as a security company, decide which events are on the custom event timeline in app: armings and disarmings, alarms of security sensors and alarms of utility sensors, operator actions during the alarm processing, reports of rapid-response groups.

Technological as a banking application

— Authorization by phone number and SMS-code;
— entrance by pin-code and fingerprint (Touch ID);
— push-notification of events;
— balance of the personal account (soon);
— armings and disarmings , control of automation.

Temperature control

We output the readings of the temperature sensors on the screen of app.

Adjust the thresholds: then
with temperature changes above or below the threshold you will receive notifications.

Control automatics

You can open the gate,
switch on heating, light and much more directly from the app.

Utility sensors

You can connect smoke detectors and water leak sensors to the North GSM Air.

In case of triggering of sensors you will receive notifications until do not react.

Sound notifications

We voiced all the push-
notifications by Rita's voice. You definitely do not miss an important event among notifications on your phone.

Virtual panic button

The button is connected to the site, but you can press it from the app.

You can provide this service to your customers without installing an additional equipment.

What you can connect to Nord Mini

Wired equipment of third-party
manufacturers

Technical specifications

Connection channels

GSM

2 sim-cards.
Internal GSM-antenna.
Remote GSM-antenna (option).

Inputs and outputs

4 (16) wired zones

Expansion up to 16 zones with EW-12.

4 (16) discrete outputs

1-Wire

You can connect TM or RFID-reader, light alarm, siren and remote wired temperature sensor.

Mini USB

Users and partitions

32 users

32 TM or RFID-keys

32 partitions

Housing

150x96x33 mm, plastic housing.

The housing includes: keypad, two LEDs, battery cover (front), access cover to sim-cards and a hole for access to the terminals (rear).

Power supply

Principal: remote power supply from the network 110/220 V (1 A, 12 V)

Backup: Battery 2.2 A*h, 3.7V

Temperature range

0…+50˚C

−20…+50˚C

When operating from an external backup power source. Not included in the standard kit.

Configuration

Mini USB (Hubble Configurator)

Virtual Expert App (Hubble configurator)

Bluetooth (soon)

Supply kit

The board of Nord Mini in a plastic housing;

built-in keypad;

remote power supply unit from the 110/220 V network;

Battery 2.2 A*h, 3.7 V;

built-in GSM-antenna.

Wiring diagram