Nord Mini Built-in keyboard

What do the LEDs show?

  • The red LED is constantly on, if all sections of the device are taken under protection.
  • When the partition is disarmed, the red LED goes out and the green LED lights up for 5 seconds.
  • The red and green LEDs flash simultaneously if an error has occurred. For example, if you enter the wrong user code or if you refuse to take it.

How to arm?

If the user can manage only one partition, in order to arm, you need to press the "house" button and enter the user code.

  • if the code is correct, then the object (partition) will be taken under protection, the device will confirm taking by turning on the red LED.
  • if the code is incorrect or the user who owns this code is related to more than one partition, then the device indicates an error.
  • if arming is not possible, the device will also display an error.

If the user can manage several partitions, to arm, you need to press the "house" button, dial the section number, then # and enter the user code.

  • If the code is correct, then the object (partition) will be taken under protection, the device will confirm taking by turning on the red LED.
  • When you retake the same section, the device will simply display its status: the red LED will turn on.

How to disarm?

If the user can manage only one partition, in order to disarm, you need to enter the user code.

  • if the code is correct, then the object (partition) will be disarmed. The device will confirm disarming by turning on the green LED;
  • if the code is in correct or the user who owns this code can manage several partitions, then the device indicates an error.

If the user can manage several partitions, in order to disarm, you need to dial the section number, then # and enter the user code.

  • If the code is correct, the partition will be disarmed. The device will confirm disarming by turning on the green LED;
  • In case of repeated disarm of the same section, the device will simply display its status: the green LED will turn on.

How to determine the status of an object or section?

If all partitions of the device are armed, then the red LED is on.

In order to identify the status of the object, you need to press the i button. 

  • if all partitions of the device are disarmed, the green LED will turn on;
  • if part of partitions is armed, and part is disarmed, the device will indicate an error. You must explicitly specify the partition number, the status of which you want to determine;
  • if there is no partition in the device configuration, the device will indicate an error;

In order to determine the status of a specific section, you need to dial the section number and press the i button.

  • if the partition is armed, the red LED will turn on;
  • if the partition is disarmed, the green LED will turn on;
  • if there is no partition with such number in the device configuration, the device will indicate an error.

How to activate the panic button?

To activate, press and hold  for 3 seconds the buttons  and . Turning on the green and red LEDs for 1 second accompanied by a sound indicates that the panic button has been pressed.

If the configuration of the device does not allow the use of the keyboard as a panic button, then the device indicates an error.

How to understand that there is an active delay in entry or exit?

If an exit delay is configured on the device, then during this delay the red LED flashes and the beeper is on.

If the device has an entry delay, then at the beginning of this delay, the buttons backlight turns on.

How to turn off the sound of confirmation of pressing buttons?

In order to enable or disable the sound confirmation when pressing the buttons, you must simultaneously press and hold the "#" and "9" buttons.

How to turn off the buttons backlight?

In order to turn the backlight on or off, you must simultaneously press and hold the "#" and "0" buttons.

Why does the device speak?

In the first generation of devices (“Nord GSM Mini 13.2” and “Nord GSM Air 15.1”) a built-in speaker was installed, which was used as a voice informant.

The voice indicates:

  • Arming and disarming partitions and the object in general.
  • Refusals to arm (including due to debit debts).
  • Warnings about debit debts when arming.
  • The status of the section or object i general (when pressing the i key).

Additionally:

  • Nord GSM Air
  • Nord GSM Mini